EASITRIM^®:What you need to do.

1. Install the EASITRIM^® corners with finishing nails and glue.  Pre-drill all corner before nailing.

2. Measure the inside length between two corner pieces.  Mark this distance on the moulding and using a square, draw a line from top to bottom.

3. Cut the moulding at 90º.  Send ends lightly.

4. Install the moulding between the corners, securing with finishing nails.  Countersink the nail heads using a nail set fill the holes using wood filter.

5. Finish with paint, stain or varnish*.

*N.B. When painting we recommend a latex primer and one or more coats of alkyd or latex paint.  For stain, always start with a filter/sealer to ensure that the stain is uniformly absorbed.  When using paints, stains, varnishes and sealer follow the manufactures instruction.  Finish dentil cornices before installation.